FLX3 AIR · MAKE MORE OF YOUR FREE 3 HOURS

Free-electricity hours.
A more comfortable home.

Make your eligible free-electricity window work harder. FLX3 Air is being developed to coordinate compatible air conditioning with your chosen energy periods—helping you shift heating and cooling away from paid electricity.

Pre-orders open · Compatibility and release timing to be confirmed

Reserve your FLX3 Air for $100 today

Total price $995 including GST · $895 balance remaining

This is a preorder deposit, not the full product price. We’ll confirm equipment compatibility and delivery timing before fulfilment.

3-year product warranty · Installation additional

Delivery details below.

FLX3 Air smart energy controller

Potential electricity savings

Up to $3,534 a year*

Shift up to 21 kWh of electricity use into one eligible three-hour window in this maximum example.

Illustrative maximum: a large-home air-conditioning system drawing 7 kW of electrical power for three hours, shifting 21 kWh a day from 46.1c/kWh into eligible free electricity, every day of the year.

Actual savings depend on electrical consumption, operating time, weather, your existing tariff and your plan’s free-energy allowance. Seasonal use will produce a lower annual figure.

This is an illustrative maximum, not a typical household result or a guaranteed saving. Here, 7 kW means electrical input—not advertised cooling or heating capacity.

Why FLX3 Air

Comfort timed around better energy periods.

Make your free hours count

Coordinate supported air-conditioning operation with your electricity plan’s eligible free-power window.

Plan comfort around your day

Where supported, use the free window to pre-cool or pre-heat your home. How long that comfort lasts depends on your home, insulation and the weather.

Automate the supported controls

FLX3 Air uses a compatible control interface to coordinate operation with your chosen energy rules.

Three clear steps

How it works

01

Check your plan

Confirm your free-electricity hours and any usage limits.

02

Check your air conditioner

Provide its make and model so we can assess the supported control interface.

03

Install and configure FLX3 Air

Once released, an appropriately licensed installer connects and configures the approved equipment for your system.

The electricity retailer provides the free-energy offer. FLX3 Air coordinates supported equipment; it does not create free electricity.

Explore your potential

Savings calculator

Annual avoided electricity cost = average electrical input × hours shifted per day × days used per year × tariff ÷ 100.

Illustrative annual avoided cost

$3,534

Inverter air conditioners vary their electrical consumption. Heating and cooling capacity is different from electrical input. Savings only represent electricity that would otherwise have been purchased; extra use during free hours may provide comfort without reducing a previous bill. FLX3 Air, Water and EV may share the same household free-energy allowance. Results are illustrative, not guaranteed.

Check before you reserve

Will FLX3 Air work with your system?

Compatibility depends on the exact model and supported control interface. We check DRM/DRED support or other approved connections, with installer inspection where needed. DRM/DRED capability alone does not prove that every planned start, stop or scheduling function is supported.

Compatibility checking is available without paying a deposit.

Product details

What’s included
The final release configuration is still being confirmed. The Air sales sheet describes a standard FLX3 controller, relay interface and connection cables, but these are not presented as final inclusions until confirmed.
Compatibility and supported controls
Compatibility depends on the exact air-conditioner model, supported control interface and installation. DRM/DRED capability alone does not confirm support for every planned start, stop or scheduling function.
Technical specifications
Final electrical ratings, supported interfaces and release-version functions are awaiting confirmation. Calculator inputs refer to electrical input, not advertised heating or cooling capacity.
Delivery and installation
Shipping costs up to $50 are included. Any excess delivery charge is invoiced separately before dispatch. Installation and site-specific electrical work are additional.
Preorder and deposit terms
The $100 payment is a preorder deposit toward the $995 total product price, leaving $895 remaining. Cancellation/refund terms and the milestone when the balance becomes payable have not yet been confirmed. Release and delivery timing are also to be confirmed.
Installation guides and wiring diagrams
Installation guide coming soon
Three-year product warranty
Every FLX3 comes with a 3-year product warranty, backed by Powerdiverter Australia. Read the applicable terms.

Frequently asked questions

Does FLX3 Air create free electricity?

No. Your electricity retailer provides the eligible free-energy offer. FLX3 Air coordinates supported equipment.

Is every air conditioner compatible?

No. Compatibility depends on the exact model, approved control interface and installation assessment.

Is $100 the full price?

No. The total price is $995 including GST. The $100 deposit leaves an $895 balance.

Is installation included?

No. Installation and site-specific electrical work are additional.

Reserve FLX3 Air for $100 today.

Total price $995 including GST · $895 balance remaining

Compatibility, release and delivery timing to be confirmed.

$100 deposit

$995 total price