Guide
What is a solar diverter?
A solar diverter sends leftover solar power to your electric hot water tank instead of exporting it cheaply to the grid. Here is how it works, who it suits, and how Powerdiverter fits in.
What a solar diverter is
A solar diverter is a controller installed at the switchboard that measures the power flowing into and out of your home. When your solar system is generating more than the house is using, the extra power would normally be exported to the grid.
The diverter sends that surplus to a load you choose instead, usually the heating element in an electric storage hot water tank. It adjusts continuously, so the tank uses the spare solar rather than drawing it from the grid.
It is not a battery and it does not store electricity. It stores heat in a tank you already have.
How excess solar heats an electric storage tank
An electric storage tank heats water with a resistive element, and that element can run at part power. As the sun strengthens and the house load falls, the diverter increases the power going to the element. When clouds pass or the oven goes on, it reduces it again.
Because the tank holds hot water, heat made at midday is still there in the evening. The tank thermostat sets the upper limit, so the diverter cannot overheat the water.
On a clear day with a suitable array, the tank often reaches its thermostat setting on solar alone. On a cloudy day it may only get part of the way, and the normal electricity supply finishes the job.
Who it suits
- An electric storage hot water tank with a resistive element.
- Rooftop solar that regularly exports power in the middle of the day.
- A low feed-in tariff, where using your own solar at home is worth more than exporting it.
- A single-phase or three-phase supply that an electrician has assessed as suitable.
Who it may not suit
- A heat pump hot water system. Heat pumps need steady power and their own controls, not a variable diversion signal.
- Households with no spare solar, where the array is already fully used by the home or a battery.
- Homes on a very high feed-in tariff, where exporting may be worth more than self-use.
- Tanks wired only to a controlled load with no capacity to take extra solar during the day.
How Powerdiverter Model 3X does this job
Powerdiverter Model 3X is the hardware for this job. It measures your supply and modulates power to a compatible electric hot water element, using available surplus solar as it changes through the day.
It is available in single-phase and three-phase configurations. Dual-phase and unusual supply arrangements need to be assessed before an order, because the phase configuration and metering affect what the unit can control.
The dashboard shows what the system is doing. An optional temperature sensing kit shows readings from inside the tank, so you can see the temperature before deciding whether to boost.
Hardware pricing excludes installation. A licensed electrician must confirm the element rating, circuit arrangements and whether additional components are needed for your site.
Model 3X single-phase and three-phase hardware details, plus the compatibility guide for tanks and systems.
When FLX3 is the better fit
FLX3 is a different approach. Instead of following surplus solar moment by moment, FLX3 Water schedules a compatible electric hot water load around set times, such as a free or low-cost electricity window on your plan.
That suits households whose plan offers cheap or free power in a particular window, or who want hot water heating to run at a predictable time regardless of the weather. FLX3 EV and FLX3 Air apply the same scheduling idea to compatible EV charging and air conditioning.
Scheduled switching is not variable solar diversion. If your goal is to soak up spare solar as it appears, Model 3X is the relevant product. If your goal is to move hot water, EV charging or air conditioning into cheaper hours, look at FLX3.
Compare the range on the FLX3 page.
Next steps
Check whether your hot water, solar and supply suit a diverter before ordering. If anything is unclear, ask us to review your setup.
This guide is general information, not advice on your installation. Hardware pricing is for the equipment only, and installation by a licensed electrician is additional. Site-specific electrical work and additional components may be required.